Shouxin Shouxin
Shouxin Shouxin

Are you looking for a product?

Found 0 record that meets the criteria

More

How Much Polyacrylamide Is Required per Ton of Water? Scientific Dosage Formulation for Optimal Water Treatment Results

Release time:2025-01-06

source:Shouxin

share:

Market Research & Insights


Shouxin Marketing Center


We are often asked: how much polyacrylamide (PAM) is actually needed per ton of water? There is no simple answer to this question, as PAM requirements vary across different industries and for different types of wastewater and sludge. The concentration, composition and charge properties of wastewater, as well as the type of PAM selected, all affect the dosage. An improperly selected model will not only result in poor treatment effect but also lead to increased dosage and rising costs. By contrast, precise model selection can significantly reduce dosage while guaranteeing satisfactory treatment performance.

1. Model Selection Test: The First Step to Determine a Reasonable Dosage

To figure out the required PAM dosage per ton of water, the most scientific method is to first conduct a large-scale model selection test to derive the theoretical optimal dosage. The specific procedures are as follows:

(1) Collect on-site wastewater or sludge samples for bench-scale tests.

(2) Carry out comparative tests with different PAM models and observe the flocculation effect.

(3) Identify the model with the best performance and calculate the required dosage.

(4) Estimate the dosage per ton of water in actual treatment processes based on the experimental data.

During the test, model selection is of vital importance. Different suppliers provide different PAM models. If a supplier has a wide range of product models and can provide precise model selection services, clients can more easily find the best-matching model to ensure optimal floc formation while reducing unnecessary reagent waste. Shouxin collaborated with Chinese and American academicians to innovate and conducts formula R&D with a focus on stable product quality. It offers more than 100 PAM models and delivers large-scale model selection services to help clients precisely match the most suitable product models, thereby improving flocculation effect, reducing dosage and lowering overall costs.

2. Selecting the Right Model Saves Dosage and Cuts Costs

In water treatment processes, a well-matched PAM model not only delivers better flocculation performance and faster sedimentation or dewatering, but also reduces the required dosage. On the contrary, a wrongly selected model may require increased dosage to compensate for the unsatisfactory effect, leading to higher application costs. Therefore, precise model selection is the key to reducing PAM consumption.

3. Product Quality Stability Is Equally Important

In addition to model selection, the quality stability of PAM products is also a major factor affecting application effect and dosage. Unstable quality may cause fluctuating dosage and inconsistent flocculation effects during use, bringing troubles to actual operation.

PAM production is affected by various factors and is prone to quality deviations between batches. Some manufacturers in the market produce products with poor stability in order to reduce costs, which makes it difficult for end clients to ensure consistent performance in use. However, most end clients in the market do not have professional testing means and cannot directly judge the quality stability of products. Therefore, it is crucial to choose a supplier equipped with a strict quality supervision system.